How to Fix the windows blue screen
A blue screen saying Your PC ran into a problem and needs to restart. in both Windows 10 and 8.
All processes are closed, and the computer restarts, this error may prevent the computer from booting the operating system, and after another restart you will see the same blue screen again.
Causes of the blue screen error
Most of the time, it is caused by a driver failure.
For example: when the operating system tries to use drivers from Windows Update, but hardware operates normally only with original drivers from the manufacturer. these drivers were damaged, or come into conflict with the current version of the operating system.
2nd. is a virus attack, after cleaning the computer and the system registry from junk files, or when system files were damaged, and if the operating system can’t boot, try booting in safe mode.
it 's recommended, to view saved memory dumps that the operating system creates, when faced with critical errors.
Sometimes, this option can be disabled, so go to Control Panel, then System, click “Advanced system settings” on the left, switch to the tab “Advanced” and open Startup and Recovery settings.
Here are the settings that enable memory dumps
In the section “System failure,” the boxes should be checked for “Write an event to the system log” and “Automatically restart”; a little below, in the Dump file part, the box for “Overwrite any existing file” should be checked too.
Also, the system folder containing the dump file and the file name should be specified.
for a more detailed analysis, there is a free utility called "BlueScreenView".
It’s so simple that even novice users can handle it properly.
In the lower part of the program’s window, the lines in red will tell you what drivers failed, and triggered this bad error.
there is another useful tool called Who Crashed - a free utility is able to give you the exact name of the driver that triggered the error.
This tutorial video will help you in simple steps to Fix Windows 10 Blue Screen:
when you are able to find driver caused the problem, go to the official website of your hardware manufacturer to download the latest version of the software to replace the version currently used by your computer.
If this error occurred after you updated a driver, you can always roll it back to the previous version.
Open the Device Manager, right-click on a specific device, choose Properties, then Driver, then Roll Back Driver.
In Device Manager, you can also try to disable the troubled hardware - unless it’s critical for your work.
If you reinstalled drivers, but the error "CRITICAL PROCESS DIED" and blue screens of death keep bothering you, follow these steps: Reinstall drivers for main hardware elements of your computer.
If this problem occurs on a laptop, this step looks quite easy - just download all the necessary drivers from the laptop manufacturer’s website.
However, when the "CRITICAL PROCESS DIED" error hits a desktop PC, you’ll have to find drivers for your motherboard, graphics card, processor and so on, and this might involve visiting several websites.
it's not recommended to use special tools that claim to install all drivers in a minute.
If there are any restore points available, recover the computer’s condition on a date when you did not see this error.
Another thing to be done is to check integrity of the system files.
Use the standard tool specially designed for this purpose.
Launch the Command prompt as Administrator and run the command:
" sfc /scannow "
Check your PC for viruses.
Restoring the registry is also a good idea.
And it becomes especially relevant, if you made any changes there or tried to clean the registry, with specialized junk cleaners.
If nothing helps, try resetting the operating system.
You can do it from the recovery environment by choosing Troubleshoot / Reset your PC.
If none of the tricks worked, try to remember what you did to the computer before the error, "CRITICAL PROCESS DIED" occurred.
For example, it can even be triggered by connecting some USB peripherals.
If that’s the case, try unplugging the USB device, and removing the drivers, which the operating system has installed for it automatically.
How to fix the error "CRITICAL PROCESS DIED", if Windows 10 can’t boot
If you can’t boot the computer in safe mode and use special boot options, there’s one more thing to try.
You will need a bootable USB drive containing an operating system.
If a series of failed booting attempts end in a recovery environment menu on your screen, there’s no need to create a bootable USB drive or disk.
You can use recovery tools from this menu, including System Restore in the section “Advanced Options.”
The bites of the operating system in such USB drive should be the same as the bites of the operating system currently installed on your computer.
When the Boot Menu appears, click “Next” in the first window of the installation wizard,
and “Repair your computer” in the second window, in the lower left corner.
You will see the short list of possible actions.
First of all, try recovering the operating system with restore points, For this purpose, open Advanced Options and select the corresponding item.
The second step could be using the command prompt to check file integrity with the command:
"sfc /scannow"
Another thing you can do with the help of the command prompt is to restore the registry.
If nothing helps, then the only way out is to reinstall the operating system.
This tutorial video will help you in simple steps to Fix Windows 10 Blue Screen
